Back to Category
CLUTCH MASTER CYLINDER 19X20 WITH FOLDING LEVER

ACCOSSATO

Connectez-vous pour plus d'informations

Public price : 309,90 €tax incl.

CLUTCH MASTER CYLINDER 19X20 WITH FOLDING LEVER

ref :

The Accossato radial clutch master cylinder is made of aluminum with natural anodization. The piston diameter is 19 mm. The distance is 20 mm: this is the fastest version, as the lever stroke is shorter. For the same force, the greater distance between the pivot point and the pumping axis increases the force needed to change gears. It is not recommended for road use. The lever is available in black, short or long, with relief eyelet (RST) or without (NRST). The radial clutch master cylinder is fully manufactured in Italy; the screws are made of stainless steel, the bleed valve is made of galvanized steel, and the seals are made from a compound used in Formula 1. An offset riser is present to reduce pump deflection during gear changes. Each component is designed to ensure the shortest passive stroke: when the lever is activated, the gap between lever activation and actual gear change is reduced by more than 50% compared to any other radial master cylinder. The thread pitch for the line mounting is M10x1. The stop light switch is not included: it can be purchased separately under references ID001 or ID002. The fluid reservoir is not supplied with the brake master cylinder but can be purchased separately by choosing from various models.

Compatible models

Brand

Displacement

Model

From

At

All

All

All

All

All

30 other products in the same category: