SP ELECTRONICS

SP electronic autonomous shifter kit without battery with bidirectional sensor on push rod. The sensor works on compression or tension, allowing you to install it in reversed gearbox or classic gear shifting, mainly designed for "sport" type motorcycles:

The Sp Electronics EQS shifter kit allows you to upshift on the fly without cutting the throttle or touching the clutch, thus saving you time during your gear shifts on the road, during your runs or competitions on your 50 cc but also on all other displacements. A micro cut is made at the ignition with each press on the sensor located on the push rod. The sensor presented here is a double effect sensor, meaning it can be installed in normal or reversed speed. For the installation of this sensor, we recommend ordering the appropriately sized rod, that is, the length of your original rod minus 45 mm (link to order the rod here (rod R021)

This complete kit with electronic box, sensor, wiring harness is very easy and quick to install. This SP Electronic shifter kit is specifically adapted to all single-cylinder motorcycles of the supermoto, cross, enduro type, 2-stroke or 4-stroke carburetor only, it is also particularly suited to PVL ignitions (Most or Bidalot) or MVT DD. For example, the internal rotor ignitions of Derbi and AM6 engines of your 50cc, without battery, but also 4-stroke carburetor engines like pitbikes or mini GP (ohvale, bucci, Mir, pitbike, YCF…). Works for any displacement (50, 65, 85, 110, 125…).

The CDI box and the coil must be of the separate type with a wire for the shifter installation. You can adjust the cut time from 40 to 64 ms thanks to 12 micro switches. Dimensions of the box 70x35x20 mm.

You can install this kit on all your 50cc Derbi, Sherco, Rieju, Beta, Fantic, Aprilia, Gilera, HM, Honda, MBK, Peugeot, Suzuki, Yamaha…

Application list: Rieju MRT, Rieju RS2 Matrix, Rieju RS3 50 and RS3 NKD Naked, Beta RR and Enduro, Gasgas 50 rookie, Generic Trigger Sm 50, Husqvarna, Derbi Senda, Derbi GPR, Honda HM 50, Sherco 50, Masai, Fantic TX 180, Fantic caballero, Fantic XM 50, Gilera SMT 50, MagPower, Mash Fifty 50, Archive 50, Yamaha 50 DTR, Yamaha TZR 50, Aprilia RS 50 and RX 50, Yamaha Roadster 50, Gilera SMT50, Sherco SM50, Derbi Senda DRD X-trem 50 SM, Malaguti XTM 50 and all other 2 or 4 stroke carburetor motorcycles…

The kit consists of:

•          The configurable Ebox EQS electronic box
•          The plug and play wiring harness
•          The bidirectional sensor